Flooring Installation Cost in Texas (2026)
$3.50–$8.00per sq ft installed (mid-range LVP)typical 1,000 sq ft of mid-range LVP flooring: $3,745–$8,560updated November 2026
Flooring cost is quoted per square foot installed — material plus underlayment and labor. Mid-range luxury vinyl plank (LVP) is the baseline; laminate runs cheaper, tile and hardwood higher. Add 5–10% for cuts and waste (included automatically in the estimate).
Cost calculator — in Texas
Laminate / basic LVP
$1,873
≈ $3.50 per sq ft installed (mid-range LVP)
Mid-range LVP / engineered hardwood
$2,943
≈ $5.50 per sq ft installed (mid-range LVP)
Solid hardwood / porcelain tile
$4,280
≈ $8.00 per sq ft installed (mid-range LVP)
Estimate covers 535 sq ft (includes 7% waste) × per sq ft installed (mid-range LVP).
Of the mid-range estimate: $1,472 labor · $1,472 materials (typical split)
Common add-ons not in the base price
- Old flooring removaladd $1–3 per sq ft
- Subfloor repair / levelingadd $2–6 per sq ft
- Baseboard & trimadd $2–6 per linear ft
Price ranges we use
Prices updated November 2026| Tier | Unit price | Typical job (1,000 sq ft of mid-range LVP flooring) |
|---|---|---|
| Laminate / basic LVP | $3.50 per sq ft installed (mid-range LVP) | $3,745 |
| Mid-range LVP / engineered hardwood | $5.50 per sq ft installed (mid-range LVP) | $5,885 |
| Solid hardwood / porcelain tile | $8.00 per sq ft installed (mid-range LVP) | $8,560 |
Typical split: ~50% labor / 50% materials.
Baseline: mid-range LVP, material + install. Only Dallas Angi breaks out LVP directly ($3-8/sqft installed, Nov 2025); Houston/Austin pages lack a per-material split, so state tiers lean on Dallas plus a national LVP cross-check.
Partial data — single main source. Primary source plus national context; treat as a ballpark.
Sources
- Angi flooring installation cost Dallas TX (2025-11) (retrieved 2026-11-03)
- Angi flooring installation cost Houston TX (context) (retrieved 2026-11-03)
- ReallyCheapFloors - cost to install 1,000 sqft vinyl plank (2026-09) (retrieved 2026-11-03)
- Homewyse - cost to install sheet vinyl flooring (2026-05) (retrieved 2026-11-03)
Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.
Flooring Installation prices across Texas metros
Published prices are usually city-level — the state range above is aggregated from these metros.
Dallas
$3.00–$8.00 per sq ft installed (mid-range LVP)
Get exact flooring installation quotes in Texas
Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.
Frequently asked questions
How much does flooring installation cost in Texas?
In Texas, expect $3.50–$8.00 per sq ft installed (mid-range LVP). A 1,000 sq ft of mid-range LVP flooring typically runs $3,745–$8,560, with most projects landing near $5,885.
Is flooring installation more expensive in Texas than the national average?
No — Texas runs about 21% below the national average ($5.50 vs $7.00 per sq ft installed (mid-range LVP)).
How much of the flooring installation price is labor vs materials?
Typically about 50% of the total goes to labor and 50% to materials. Labor share climbs on smaller or more complex jobs and in high-cost metros.
How can I pay less for flooring installation?
Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.