Siding Installation Cost in California (2026)
$6.00–$17.00per sq ft installedtypical 1,500 sq ft of vinyl siding: $9,720–$27,540updated November 2026
Siding is priced per square foot of wall surface, installed. Vinyl is the baseline; fiber cement (James Hardie) runs 40–80% more and wood/stone veneer higher still. Wall area = perimeter × height minus doors and windows — the calculator does that math for you.
Cost calculator — in California
Standard vinyl
$8,359
≈ $6.00 per sq ft installed
Premium vinyl / insulated
$13,932
≈ $10.00 per sq ft installed
Fiber cement or engineered wood
$23,684
≈ $17.00 per sq ft installed
Estimate covers 1,393.2 sq ft (includes 8% waste) × per sq ft installed.
Of the mid-range estimate: $5,573 labor · $8,359 materials (typical split)
Common add-ons not in the base price
- Old siding removaladd $0.5–2 per sq ft
- House wrap / insulation boardadd $1–3 per sq ft
- Soffit, fascia, trimadd $2–6 per linear ft
Price ranges we use
Prices updated November 2026| Tier | Unit price | Typical job (1,500 sq ft of vinyl siding) |
|---|---|---|
| Standard vinyl | $6.00 per sq ft installed | $9,720 |
| Premium vinyl / insulated | $10.00 per sq ft installed | $16,200 |
| Fiber cement or engineered wood | $17.00 per sq ft installed | $27,540 |
Typical split: ~40% labor / 60% materials.
Baseline: vinyl siding, installed. Sources genuinely diverge: LA low quotes $2-6/sqft (ProMatcher/Thumbtack) vs San Diego/Bay Area $7-25/sqft - state tiers are a median aggregation; treat as a wide-band estimate.
Partial data — single main source. Primary source plus national context; treat as a ballpark.
Sources
- Fixr Vinyl Siding Cost (national) (retrieved 2026-11-03)
- ProMatcher Siding Costs Los Angeles CA (retrieved 2026-11-03)
- Thumbtack Vinyl Siding Install Los Angeles (retrieved 2026-11-03)
Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.
Siding Installation prices across California metros
Published prices are usually city-level — the state range above is aggregated from these metros.
Los Angeles
$5.00–$12.00 per sq ft installed
San Francisco
$10.00–$20.00 per sq ft installed
San Diego
$7.00–$13.00 per sq ft installed
Get exact siding installation quotes in California
Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.
Frequently asked questions
How much does siding installation cost in California?
In California, expect $6.00–$17.00 per sq ft installed. A 1,500 sq ft of vinyl siding typically runs $9,720–$27,540, with most projects landing near $16,200.
Is siding installation more expensive in California than the national average?
Yes — mid-range siding installation in California runs about 43% above the national average ($10.00 vs $7.00 per sq ft installed). Local labor rates and permitting drive most of the gap.
How much of the siding installation price is labor vs materials?
Typically about 40% of the total goes to labor and 60% to materials. Labor share climbs on smaller or more complex jobs and in high-cost metros.
How can I pay less for siding installation?
Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.